深圳市鑫桥宇防静电产品经销部
新增产品 | 公司简介
注册时间:2009-04-13
联系人:
电话:
Email:
首页 公司简介 产品目录 公司新闻 技术文章 资料下载 成功案例 人才招聘 荣誉证书 联系我们

产品目录

防静电服
防静电鞋
防静电拖鞋
防静电手套
防静电手指套
防静电棉签
净化抹布
无尘纸
防静电台垫
防静电手腕带
PCB存放架
PC离子风机
防静电帽
手指套
接地线
防静电刷
口罩
鞋罩
防静电袋
VERMASON
VERMASON测试仪
VERMASON设备测试仪
美国ACL静电液
OLYMPUS镜头清洗液
防静电标识
无尘室文具
粘尘地板胶
防静电窗帘
防静电镊子
防静电周转箱
防静电托盘
防静电元件盒
塑料周转箱
塑料零件箱
塑料托盘
SMT上下料架
防静电手推车
防静电镀铭货架
防静电椅子
离子风机
工业工具系列
防静电地板
空气过滤器
净化传递窗
防静电中空板周转箱
美国ACL除静电剂
国产表面电阻测试仪
塑料周转箩
美国ACL静电检测仪
首页 >>> 技术文章 >

技术文章

门禁系统使用说明书

门禁系统使用说明书
         ESD door locking system operation instruction
 
静电防护门禁系统是一套电脑化的防静电测试门禁管理系统,软件硬件设备齐全,可以单机.本地连接.TCP/IP通讯连接。门禁系统主要是对通道进出进行权限的管理,就是对每个通道设置哪些人可以进出,哪些人不能进出,系统可以储存所有的进出记录,状态记录。也可用RS232或者RS485接口和电脑相连,系统使用非接触ID卡技术,采用射频信号交换数据,免接触,具有高保密,高可靠性。本系统的进入方式:
当测试仪器测试手腕带和防静电鞋(脚筋带)都PASS时,进入门自动打开,允许进入。
当测试器遇到VIP(免测卡)时,进入门自动打开,允许进入
ESD door lockingsystem is a computerized managing system, and can be connected bysingle machine, local and TCP/IP communication message withsoftware and hardware. This system is mainly control passage topass in and out, who can pass in and who can't pass in, it canstore all entry/exist records. It can also be connected by RS232 orRS485 interface with computer. At present it uses free touchtechnology and changes data by radio frequency signal, withfeatures of high confidence and strict dependability. The entry wayfor ESD door locking system is asfollows:    
When Combo-TesterKit shows wrist strap and anti-static shoes(heel grounder) PASS,entry door will be opened automatically, operator can gothrough.
Door will openautomatically when test instrument test VIP card (freecard).
一.静电防护门禁系统的标准操作步骤:
1.测试人员穿好防静电鞋或脚筋带踏上测试仪器的脚踏板上
2.将防静电手腕带插入测试仪,测试人员戴好手腕带
3.将身上配带的ID卡靠近刷卡器,读取卡上的信息资料
4.按住测试仪上的测试仪按钮,等待三辊闸上LED显示测试结果。(步骤3与4可以交换,*长时间为5S)
5.如果测试OK(人体综合测试仪显示手腕带与脚筋带PASS,三辊闸上LED指示绿色箭头),系统则开启静电防护门;电脑上会自动记录测试员工的测试结果,显示结果为绿色字体静电通过。如果测试结果不OK,请根据人体综合测试仪的LED显示检查测试人员的手腕带与防静电鞋(或脚筋带),电脑上会自动记录测试员工的测试结果,显示结果为红色字体"静电超时".此方式可以让管理者更加有效的控制员工所带手腕带与防静电鞋的好坏情况,以便采购人员有效的跟踪采购手腕带与防静电鞋(或脚筋带)
6.此系统支持SQLSERVER及ACCESS软件
一.Testingprocedures:
1.Operator stand on the installed foot plate withanti-static shoes or heel grounder.
2.Plug wrist strap into Combo-Tester Kit,operatorconnect wrist band to arm.
3.Bring ID card to card reader, information fromthe card will be read.
4.Press test button on Combo-Tester Kit and waittest results from tripod turnstile's LED(Step 3 and 4 can beexchanged, the longest time is 5S)
5.If test indicates PASS (Combo-Tester Kit showwrist strap and heel grounder PASS, LED from tripod turnstilebecome Green arrow),the entry door will automatically open and testresults” Access entry” will be shown on computer automatically,which are Green color words. However if test indicates Fail,please check wrist strap and anti-static shoes(or heelgrounder)according to LED indication from Combo-TesterKit,meanwhile computer will show Red color test results “Invalidcard”. This system could let supervisor control operator’s wriststrap and anti-static shoes more efficiently, in order to makePurchasing track the working status of wrist strap and anti-staticshoes(heel grounder) better.
6.The system support SQL SERVER & ACCESSsoftware.
 
                             
二.静电防护门禁系统之三辊闸安装
二.Installation of tripod turnstile
 
1.选择安装三辊闸的位置,固定三辊闸.
1. Choosing installationposition of tripod turnstile and fixing it.
2. 闸杆的装配(见图1)Assembleof rod.

 

闸杆
 
1).把闸杆放入铝盘安装槽中;  

 

1)Putting the rod in theinstallation flume of aluminium tray.
2).把定位片(location unit)装入铝盘销孔;
2)Putting the location unit inthe aluminium tray.
3).把定位片(location unit)装到位,螺钉紧固即可。
3)Confirm location unit was installed exactly,fixing the screw .
3. 安装与测试
3.Installation andtesting
(1)将人体综合测试仪表头安装在三辊闸开口处,用固定夹固定后,用螺丝固定.
(1)Installing Combo-Tester Kitmeter on the open position of tripod turnstile, using clip fix themeter and then using screw.
 
(2)人体综合测试仪表头手腕带”right”处侧面的绿色线作为开关信号线,连接软件控制板的第三连接孔固定(我司都已安装好)
The green leads located on"right" side of Combo-Tester Kit is switch signal wire, whichshould be connected to the third jack of software controlplate(installed already before shipment)
 
(3)人体综合测试仪”left”面插孔为仪器DC 12V电源插头,DC 插头为直径3.5电源适配器.
(3)The socket be located atCombo-Tester Kit left side is the DC 12V power adaptor(diameter3.5)
 
(4)仪器底部为左右脚测试插孔,用”1”线连线端子测试踏板的左边,用于测试左脚,用”2”线连接测试踏板的右边,用于测试右脚.
(4)The bottom of the meter aretesting jacks of feet, using cable “1”connecting left footstand, left foot can be tested, using cable”2”connecting rightfootstand, right foot can be tested.
 
(5)把工厂电源接入三辊闸内部,连接1 &2角(见图2)
(5)Inserting power which used inthe factory into the inside of tripod turnstile, plugging into 1&2 hole.(see Pic 2)
4.此设备为单方向通行(见附图3)
(1)  This equipment is singleway:
(2)检查接线是否与接线图一致,检查所有插头是否有松动:检查设备是否接地可靠;确认无误后可上电调试。
(2)Checking if coils are in accordance with theabove pictures, if all plugs slack or not, if all equipment begrounded .When you confirm all is ok, testing can beproceed
 
4 .Function testing
(1)开闸功能测试:当三辊闸有开闸信号后,三辊闸会自动解锁,通行方向指示器变为绿色箭头,等待行人进入,当超过设定时间后仍无人通行,设备会自动复位。
(1)Opening floodgate test: whentripod turnstile has openning floodgate signal, tripod turnstilewill be automatically operated, the indicator will become greenarrow and await passengers going through. Systems automaticallyreposition if passenger does not pass in regulatedtime.
 
(2)落杆功能测试:切断电源,闸杆落下;接通电源后电磁铁会产生磁力,即可进行手动升杆;.升杆方法:先用力压杆然后再抬杆至水平位置卡住即可。
(2)Dropping rod test: when it’spowered off, the rod will automatically drop. when it’s powered onelectromagnet will cause magnetism, so we can go up rod by hand.Rod rise method: Press rod down with great strength and then liftrod to level position.
 
●注意:测试过程中突然断电,闸杆落下,但通电后一定要用手压杆然后抬杆至水平位置,测试方可继续
●CAUTION:If operator meetinterruption of power supply suddenly during test, the rod willautomatically drop, but when it’s powered on again, operatorMUST press rod down with greatstrength and then lift rod to level position, testing can beproceed.
 
 5.注意事项:
 
5 .CAUOTION:
 
  (1)在搬运安装三辊闸过程中,当心不锈钢划伤手.
(1)During transit and installation, please takenotice of stainless steel lacerating hands.
(2)未经许可,设备上请勿添加外围设备且确保系统接地可靠,保证设备工作的**可靠
(2)Don’t add additional equipmentoutside tripod turnstile without permission and make sure groundsystem is reliable.
(3)此仪器为继电器信号开启三辊闸,测试过程中禁止测试者用力拍打三辊闸。如在测试过程中测试者用力拍打三辊闸,使测试表头受到震动,继电器信号触发,导致测试结果失误。
(3)SURPA-8888 has relay signal tostart tripod turnstile, swatting tripod turnstile is prohibitedduring test. If operator swat tripod turnstile with heavy pressureduring test, SURPA-6506 tester may feel the shake and trigger relaysignal, thereby cause Fail testing.
(4)此仪器在测试过程中,操作员工按测试按钮的时间必须控制在2秒左右,测试稳定可靠;如按测试按钮速度特别快时(<1秒),仪器将有1/50毫秒的速度来触发继电器,使测试结果不准.
(4)Time of pressing button have to becontrolled in about 2 seconds during test, and then testing isstable and reliable. However if press button speed is quitequickly(<1S),testing results may not be correct as instrumenthas 1/50 millisecond to trigger relay.
(5) 上述指引如有不明,请联系供应商。
(5)Any questions about theinstructions, please contact supplier: HZR ESDLIMITED.
 
 
                                   
Parameter 参数
 
1.Structure:import 304 stainlesssteel                结构:进口304不锈钢        
2. Floodgateweight:70.00KG                      闸重量:70KG 
3.Size:1200x280x1000Hmm                      外型尺寸:长1200×宽280×高1000(mm)
4.Length ofshaft:500mm                          闸杆长:500(mm) 
5.The shaft can bear the maxweight:80.00kg        
闸杆*大承受力:80Kg 
6.Workingdrive:3.00kg                            
闸杆工作驱动力:3Kg
7.Transmission way:motor-driven(Mechanical)       闸杆传动方式:电动(机械传动)
8.Turn direction: Singleway                        闸杆转向 :单 向
9.Switch time :≤1seconds                         开关时间 :≤1秒
10.Average trouble-free running: ≥500000hours       
平均无故障运行时间:≥500000小时
11.Speed of pass through:15times perminute        通行速度:15人次/分
12.Lights indication: Green/pass,Red/prohibit         
灯光提示:绿灯通行,红灯禁止通行
13.Trouble status: go throughfreely without electricity   故障状态:断电后可自行通行                             
14.Outer shell protect: seal up&waterproof           外壳防护:密封防水          
15.Control&examineplace:3                       控制及检修口:3个  
16.Pack:woodencase                             包装:木箱

 
上一篇:防止易燃液体因静电发生事故应采取的措施
下一篇:静电防护门禁系统软件操作说明
            
若网站内容侵犯到您的权益,请通过网站上的联系方式及时联系我们修改或删除