首页 >>> 公司新闻 >

公司新闻

Sticky mat structure

Sticky mat structure
Material: environmentally friendly pressure-sensitive adhesive + PE PE membrane water
Structure: a layer of non-adhesive transparent film of polyethylene PE bottom layer of polyethylene PE coating +29 single mask (usually color sky blue) +1 layer of polyethylene PE coating double mask composite. Usually sticky mat corner posted a page label.
 
Instructions for use
First torn from the opening on the back surface of the protective layer of plastic, then paste on flat ground clean and dry on the track and out of the floor, sticky mat with the soles pressed flat on the ground, and then torn from the front opening under the protective layer, so that you can use (if you are using the process of the film surface Nianman dust, they tear up the floor from the opening, so that they can use the next layer clean the film) can be seen, the first step the third step is torn and transparent, which is what we call a protective layer. The protective layer is used to protect not sticky mat before using clean. In addition to the protective layers, each corner will be marked in accordance with the order 1,2,3,4 facilitate customers rusty after this layer, change to a new level.
上一篇：Clean PU palm coated glove Profile
下一篇：Wiper Application

粤公网安备 44190002002409号