首页 >>> 公司新闻 >

公司新闻

Anti -static clothing cleaning specification
Anti -static clothing cleaning specification
 
( 1 ) new sewing anti -static clothing can be directly washed , and recycled through the anti -static clothing found in oil , then carefully remove the oil washing procedures .
( 2 ) To scrape before washing , damage and hasp and other accessories to check for defects to be repaired , replaced or scrapped.
( 3 ) must be cleaned , dried in clean overalls than using high clean room clean room , packing.
( 4 ) wet or dry- cleaning water to be filtered , the solvent was distilled off also after the point of use filter with pore size of less than 0.2μm , the filter more than once if necessary .
( 5 ) In order to remove water-soluble contaminants , after washing with water , and then a final wash solvent to remove oil contaminants.
( 6 ) wet scrubber water temperature as follows: polyester fabric 60-70C ( maximum 70C) Nylon 50-55C ( maximum 60C)
( 7 ) has a buckle overalls, should be washed in a snap state.
( 8) drying the washed dedicated clean air circulation system . After drying in a clean room dedicated to washing folded , into the bone clean polyester bag or pocket , the request may be double packaging , plastic can also be vacuum packaging material is preferably a material excellent in antistatic property . Because of the folding process most prone to dust, thus folding process must be carried out in a high level of purification space.
上一篇：Sticky roller Overview
下一篇：The main purpose of the anti- static finger sets

粤公网安备 44190002002409号