Construction procedures and specific methods of anti-static mat
1, clean the floor with a cleaning solution or xylene waste matter (with washing machine)
2, ground floor guide grid laying copper strip thickness of 0.02mm, a width of 20mm, the number of requirements based on the actual width of the ground to determine the length and number (copper strip direction perpendicular to the direction of anti-static mat, a copper bar spacing 2-3m ), while the copper bar at one end toward the ground laying outdoor grounding.
3. After laying the ground guide grid, followed by the anti-static mat to fight on the ground, if the gap between the pad too, can cut straight knife to make the gap smaller. The laying of a good anti-static mat edges turned in Taiwan mat (about 20cm), the gap in the middle position glue water (401 glue or double-sided tape), dry for 20-30 minutes, until the hand stick, (double-sided tape Now you can bond), the same anti-static bottom surface (black face) operations (coating evenly once, double-sided tape can be applied to the ground, anti-static bottom surface does not require double-sided sticky tape), then anti-static mat and ground bond, and then re-roll rolling several times, it makes anti-static mat neat flat surface can be (if there is heavy rollers rolled by hand or by foot press), at room temperature may be used after 48 hours.
Dear Customer: Hello, Our company is well-known anti-static industry enterprises, 10 years of experience in supporting anti-static, complete product line, selling products have a lot of inventory. Fortune 500 companies than 10,000 customers worldwide, with high quality products and complete solutions for static and quality of service. The main products are sticky mat, laid paper, sticky roller, anti-static fluid, PU-coated finger gloves. The company "technology-based, independent research and development, to build its own brand" direction of development, adhering to the "based on science and technology, honesty, pride in service, quality first" business philosophy.
